Sami Marin Stainless Steel Bollard & Cleat
Elegant and exceptionally strong 316L stainless steel mooring bollards and cleats. Providing safe and reliable mooring solutions for boats, yachts, and ships.
Key Features
Solid Steel Durability
Does not bend or break in severe winds thanks to its solid or heavy wall thickness structure.
Rope-Friendly Form
Does not wear out your expensive mooring ropes thanks to its rounded smooth edges.
Flush Deck Mount Base
Does not damage fiberglass or wood by spreading the load at the mounting point over a wide area.
Hidden Mounting Screws
Provides a clean and very elegant look with stud sockets invisible from above.
Two-Way Mooring
Deep ear structure allowing cross or figure-eight type moorings.
Mirror Finish Surface
Mirror-polished corrosion-resistant 316L exterior through electropolishing and hand craftsmanship.
Wide Variety of Designs
Custom production options in cleat, cylindrical, cross, or special architecture.
7 Years Warranty
This product is covered by a 7-year warranty against manufacturing and material defects.
Technical Specifications
| Feature | Cleat Type | Cylindrical (Bollard) | T-Type (Cross) |
|---|---|---|---|
| Length Options | 15cm - 40cm | 20cm - 50cm | 25cm - 60cm |
| Mounting Type | Hidden Studs / Countersunk | Flanged Welding / Stud | Hidden Studs |
| Material Type | 316L Solid Cast / Machined | 316L Profile and Plate | 316L Solid Steel |
| Place of Use | All Yachts and Boats | Commercial Ships, Marinas | Mega Yachts, Piers |
| Warranty | 7 Years | 7 Years | 7 Years |
Stainless Steel Boat Bollard (Bollard / Cleat): High-Strength Connection
Cleats and bollards, which ensure that boats, yachts, and mega yachts are safely moored to the dock or marina, are one of the most important safety equipments of the deck. During stormy weather, thousands of kilos of pulling force applied to the boat by the wind are directly borne by these equipments via mooring ropes. Sami Marin produces 316L stainless steel bollards that not only create visual elegance on the deck but can also carry incredible loads without breaking.
Monoblock Casting Quality and Mirror Polish
Low-quality or hollow (pipe-type) bollards run the risk of bending, breaking, or separating from their welds in the first severe storm. To leave no room for this safety vulnerability, Sami Marin applies a production process well above standards.
- Solid Structure and Unbreakability: Our products are manufactured by casting from 316L (A4) grade stainless steel, which has the highest corrosion resistance, and CNC machining from solid material. They pass horizontal and vertical shear load tests to comply with maritime standards.
- Rope Protecting Curves (Radius): Angular or rough bollards cause mooring ropes to wear and break due to friction. Sami Marin bollards are designed with oval and smooth lines that allow the ropes to slide safely.
- Flawless Mirror Finish: Not just a mechanical equipment but also a prestigious ornament of the yacht deck, the bollards are hand-polished by our expert craftsmen until they reach mirror brilliance.
Models According to Deck Types
We produce classic cleats for sailboats, T-Type bollards for motor yachts, and huge heavy-tonnage deck bollards for mega yacht projects. The stud and backing plates connected under the deck distribute the pulling load evenly to the deck floor, preventing the cracking of the boat's gelcoat or fiberglass.
Your Boat's Safety
The safety of the boat at the end of every rope depends on a properly designed bollard. You can contact our team for technical details and dimensions regarding Sami Marin stainless steel mooring hardware that combines aesthetics and strength.
Warranty & Technical Service
You can visit our Warranty & Technical Service page to get detailed information about the warranty conditions, terms of use, and technical service processes for this product. Please contact our technical team for product-specific warranty periods and other details.
Detailed Information →